PrintABlok to kbricks peg-beam

You can now use some parts from the kbricks system on PrintABlok cubes (wheels, axles, gears, ...).

PrintABlok has a cube size of 16mm. The cube size of kbricks is 24mm. You need 3 modules of PrintABlok for 2 modules of kbricks.

You can also use these 2 parts to make a rotating connected two PrintABlock cubes.

Printed 0.15mm layer heigth, 2 wall loop, 20% infill. If You have connected upper part, check in slicer “Retraction - Travel distance treshold”, must be belov 1.2mm. The model includes a gap around the peg to allow the slicer to make a firmer connection to the depth of the model.

To connect the base parts of the kbricks system to the PrintABlok, use this model.