Flexi Leaf Dragon(Print-in-place)

[Update]
---2024/02/07---
Straight type is now available.
---2024/05/07---
Free 3mf file released!! 
If you want to make multiple prints, use various 3mf for Bambu and Prusa.
---2026/05/06---
Fixed an issue where the limb segments of the medium dragon (square type) were fused to the rear segments.

This is Flexi Leaf Dragon. The scales are designed in the shape of leaves, and the wrists are flexible and movable.

Print in Place with no supports. No assembly required.

In addition to the standard Flexi Dragon-like size model, a medium size model, reorganized in a lizard style, is included. The medium size requires 30% less filament and time to 3D print than the large size; if 3D printing time is a concern, the medium size is a good choice.

Please take pictures of your Flexi and share them with us!

💰Commercial Use💰

This model is not available for commercial use under "CC BY-NC-ND 4.0" below. Therefore, I am selling the upgraded model with additional detailing and a license for commercial use. If you want to sell my model commercially, please check my Cults, Etsy, and MyMiniFactory.

https://cults3d.com/en/design-collectio ns/3dflexseeds/commercial-use-ver 
https://flexseedsshop.etsy.com 
https://www.myminifactory.com/users/3dflexseeds/collection/commercial-ver 

On Patreon, you can purchase public commercial models at a special discount, and new releases are available for free present🎁
In addition, you can get monthly exclusive models and generous welcome pack!!
https://www.patreon.com/FlexSeeds 

Print Settings

Printer Brand: QIDI

Printer:  S-Box

Rafts: No

Supports: No

Resolution: 0.2mm

Infill:  15-20%

Filament: TINMORRY PLA Silk Green

Notes:

Layer Height: 0.2mm
Print Speed: 60mm/s

Outer Wall Speed: 20mm/s

Z Seam Alignment: Sharpest Corner

Z Seam Corner Preference: Hide Seam

⚠Warning⚠

Be careful in environments with young children and pets!

This model contains small parts. If not properly stored in an environment with young children or pets, it may lead to accidents such as accidental ingestion or injury. If infants or pets are present, please take appropriate measures depending on the situation, such as refraining from 3D printing or storing in an appropriate place.

Do not apply strong force!

Applying strong force to a 3D printed model or throwing it may damage the model and lead to accidents such as injuries. In addition, debris from damage to the model may be accidentally ingested by infants or pets. If the model is damaged, dispose of it immediately.

Store them in an appropriate place.

After 3D printing, store the model in an appropriate place out of reach of young children and pets. Proper adherence to the precautions will ensure safe use of the model.