Stow-Away Play Kitchen for Trofast Cabinet

This little play kitchen makes use of the cavity underneath a Ikea Trofast cabinet frame (32x44x53 cm –  https://www.ikea.com/au/en/p/trofast-frame-light-white-stained-pine-70516062/  ). Just remove your tubs/baskets - flip the cabinet, reinsert tubs, and pop the taps and faucet in their spots. You could also fit other assorted play kitchen utensils in the hollowed area.

The taps and faucet/spout are interference fit and stow away in the hollow area underneath the burners / prep area.

Depending on your print-bed size you may need to cut the larger models - however on a 350x350 they can be printed in the orientation in the 3mf if you have confidence in your printer and want to do it all at once.

I would recommend printing the taps and faucet along with a test fit block (testfit.stl) as pictured to make sure it will all fit together straight off your printer, otherwise some scaling of the taps etc might be required.

The sink prints well flat, whereas the burners/prep area are best printed on it's side with a brim to keep it from tipping.

The kitchen can sit loose under the cabinet, or be affixed using velcro, a small swivel latch or even just friction fit with some cardboard shims.

Be aware the taps are small and may present a choking hazard with small children.