Pueblo Board Game

Pieces for the board game Pueblo (https://boardgamegeek.com/boardgame/3228/pueblo).

Printing

Board - No infill or supports required. I added four holes to the bottom in case I wanted to attach it to a turntable later.
Arrow (x36), Cross (x4), Square (x4) - Inserts for the outer ring of the board. Mine were just loose enough that I had to glue them in, so I advise running a test for size first.
Piece (x43) - Full game needs 16 of a neutral color, 8 for the first and second player, 6 for the third and 5 for the forth. I found the bottom bevel came out best with a 3mm brim and no supports (using Prusament Signal White PETG)
Pawn (x5) - One for Chief on board and one for each player color for scoring.

Settings

Printer brand: Prusa

Printer: I3 MK3S

Rafts: No

Supports: No

Infill: 50% for the pieces and base of board, 100% for top 2mm of board.

Filament brand: Prusament (White, Pink, Galaxy Black), Overture (Blue, Red), Esun (Purple)

Filament material: PETG/PLA