February 16, 2024
Description
A no-support necessary model of a little hedgehog. All it needs is a fluff ball of some kind - yarn or fur pompoms are perfect. Print size at 100% is about 50mm/2 in. Can be scaled up or down. The smallest I've printed is less than half that.
*Hedgehogs pictured are painted with paint markers and resin gloss with a yarn puff
Printed on Ender 3 V2 in PLA
Layer height: 0.2 for 100%, 0.1 for smaller
Supports: no
Bed adhesion: skirt/none
Infill: recommend at least 10%
Make sure you have good cooling, if not, the overhangs on the feet can get a little blobby
**Update: 2-12-2024
There was an issue with the eyes that is hopefully fixed now
**Update: 2-16-2024
It wasn't fixed. Hopefully now it is! Added a round eye and flat eye version
Please tag me if you make them, I love to see!
License:
Creative Commons — Attribution — Share Alike
Whitney Richmond
