Moomintroll and Snorkmaiden / Mumínek a Ferka

This is a reupload of a model made by MAVEN_STUDIO - https://www.thingiverse.com/thing:3760054/

A simple-looking model of Moomintroll and Snorkmaiden sitting down, but surprisingly difficult to print - be wary. I recompiled the model a bit to fix some issues. Recommended to print in white. Yu need to draw on the facial features with a black marker afterwards. 

Print settings for model in pictures:
- 0.08mm layers (the smooth curves on top and bottom look rough at 0.2mm) with 0.4 nozzle. Probably even better to do variable layer height.
- tree/organic supports with 15° threshold angle (you need to support the noses and that would be quite difficult with standard supports).
- 4 wall loops
- adaptive cubic infill at 15%
- I would advise printing as slowly as you can manage
- I would also paint on some additional support enforcers on their tails, as that is usually the part that breaks during printing.

Printed in Aurapol white PETG with an open P1P. Good luck.