Frosthaven: Monster Ability Card Tray

This is a storage tray for the Monster Ability Cards in the board game Frosthaven. The tray is designed to hold sleeved cards horizontally, along with Monster Divider cards from Tesseract Games (https://www.tesseractgames.co.uk/).

To save table space, the storage tray sits in the upside down lid when the tray is in use during a game, and there is space at the back of the lid for the wedges. The wedge pieces sit at the front of the tray during storage to keep all of the cards flat and at the same angle.

Disclaimer: I do not own Frosthaven, and the size of the tray is based on the number of Monster Ability Cards shown in the Frosthaven rulebook. See the equivalent Gloomhaven tray (https://www.printables.com/model/761688-gloomhaven-monster-ability-card-tray) for photos of how this tray will look with cards in it.

Print Settings

Printer Brand:

Creality

Printer: 

Ender 5

Rafts:

No

Supports: 

No

Resolution:

0.8 mm Nozzle; 0.2 mm Layer Height

Infill: 

20%

Filament: FormFutura; eSun; Amolen; Ender PLA; PLA+; PLA with wood Iron Grey; Brown; Walnut, Silk Gold, Silk Red Bronze; "Red"

Notes:

The tray and lid were each printed with multiple filament swaps. The wedge was printed with the narrow side down on the bed (handle up top) using a brim.

How I Designed This ===================

All components were designed in Fusion 360 and exported as .STL files to MeshMixer. A Frosthaven logo image was found on the web, transformed to black and white and edited with Gimp, converted to an .SVG file using Inkscape, and then imported into Fusion 360 for extrusion. The Pirata One font was downloaded from the web.

Category: Games