Floating Submarine - articulated - multi part

Plenty of fun ahead with this cute submarine. You can move its gripper arms, its telescope and its propeller! 

For adjusting the floating properties there is space for two coins inside the submarine. 

You can print all the parts in different colors even with a normal single extruder printer.

Print Settings:

• No supports needed.
• I recommend a skirt for the gripper arms.
• All layerheights from 0,1mm to 0,3mm should work just fine.

Assembly:

• Use short filament pieces to align the parts when gluing them together.
• For the propeller you will need one M2x10mm screw.

Work in progress. Feedback welcome! =)