Cascadia Organizer Insert - Base Game + Landmarks Expansion

Organizer inserts for Cascadia base game + Landmarks expansion. Landmarks expansion is not pictured above, but the organizer does fit everything from the expansion.

STL and STEP files included.

Wall thicknesses are all .064 inches, or 1.6256 mm, to optimize for 4 wall layers (2 inside, 2 outside) with no infill.

Also made the slot for cards slightly larger than the model from this was remixed.

Prints use 6mm x 3mm magnets in order to snap together. Specifically, I used these ones. Magnets can simply be super glued in place. In total, 30 magnets are used.

Note on assembling the magnets:

Keep in mind the orientation in which you would like the card boxes to snap together, as well as how you would like the dice box to connect to them. You may want the card boxes to snap together such that they are back to back, so that cards can still be easily removed from each. And it may be convenient to have the side magnets on one side of the dice box to face one direction, and on the other side to face the other direction. So that it can be attached to the card boxes no matter how you have their magnets situated.

The hex tile holder can hold up to 130 tiles--exactly the amount included by the base game + landmarks. They are grouped into 6 groups of 20 (and exactly 20--you can't store 21 in a single slot, which saves you having to count all 20 out.  Just stuff them in there until you can't fit more) and 2 groups of 5. There is also room for all 10 triple-hex starting tiles.

There are not specific places built into the organizer for the score pad(s), a pen, or the wildlife token bag, but they all fit in the vacant space left over in the box once the organizers are in there.

Simply one copy of each of the five included parts are necessary for the full organizer.

Also found here on thingiverse.