Tsuro Canals

This is a full set of the board game "Tsuro", using remixes from people on thingiverse.

I used the 35 tiles, "Tsuro Tile" set by muzik4mm for the game.

The "Tsuro Tile Grid" for the board. Just be sure to print the grids at 95%, and the tiles fit perfectly! You'll need to print 1 "middle", 4 "center", and 4 "corner" prints. Then, I cheated a bit for easy sake. I just used a blue marker for starting dots on the outside edges. You don't really need them, but the game has them.

Then I printed 8 different colored "Benchy's" at 32% for the 8 player pieces! Or you can use whatever you want for player pieces.

The "Dragon" tile was my design with free clip art.

The "Case" was also my design with free clip art. You'll need to print "Case 1" and "Case 2 without benchy".

If you want the colored case lid like I have, Take all the "benchy case" stl files and bring them into your slicer as one stl and print that instead of "case 2 without benchy".

To get the Tile colors, I just did a simple filament swap at a certain layer height.

Happy Printing, have fun and enjoy!