February 20, 2024
Description
He may be a baby, but don't be fooled, he's pretty big.
This design is easy to print in any material, 100 percent print in place with no assembly - Almost entirely rebuilt from a past design of mine.
(Commercial licence is only for subscribers)
Included are 3mf files and stl files
To print using the stl...
0.3mm walls for extra detail (0.42 is fine if you want a faster print)
at least 3 walls (recommended 5 for silk and weaker filaments)
gyroid infill 25%
no supports and brim only if you need good plate adhesion
Anyone using a smaller printer, it's okay to scale down in size to your plate size, just remember to increase wall count - he is build for strength so shouldn't be a problem.
Enjoy.
License:
Creative Commons — Attribution — Noncommercial — NoDerivatives
FilliFuu
