Gear motor adaptation for White Board Magnetic Marble Lift

The Marble lift by bamoore01 is just outstanding. The parts print perfectly without support, you may need some added brim to give the tall pieces more contact area to hold.

I've have over a hundred designs on Thingiverse and few match up to the quality of bamoore01 stl files.

When I started to print the Marble lift and his accessories I thought the Lego motor he used was a little expensive so I designed one with the

https://www.amazon.com/dp/B01N9MS3UZ?psc=1&ref=ppx_yo2ov_dt_b_product_details

motor which is easy to get.

Print the gearbox with supports, my Prusa slicer did a good job of the holes with the base lift base down and it uses less support material.

Pictures should show the simple construction. The gear ratio is 9:1 and I run the motor off a 6 volt wall wart or 4 AA batteries. The Gears are Mod1 gears in Fusion360 so it would be easy to change the gear ratio.

Cheers

Kisssys

Category: Construction Toys