Punk Rock Pixie Fairy in a Cage Kit Card

Hey y’all  I designed this fairy kit card because there are already too many planes/vehicles/animals. Not enough fairies with punk rock hair.  lol  

Assembly isn't too difficult but can be tricky towards the end.

First and formost, Cut all the parts out using some small cutters. The standard blue handle kind are perfect. The cut aways are the thinnest strips. Leave the number tabs on the hex rings in place; only remove them once you are ready to install them one at a time.

Next, Insert the six curved upright pieces and fairy piece into the base plate. Then one at a time moving over one each time, attach the top plate to the uprights. The plates should have the patterns facing up. Then attach the hook to the top. Be sure to align the slot of the top plate and bottom plate for best visual effect. The fit will be snug but they will click through with firm pressure and some gentle rocking. Be sure to push straight to avoid crimping or damage.

The final steps: Putting in the rings. Start with ring #1 by squeezing it vertically through the uprights and around the fairy into the lowest rungs of the uprights. It should be inside all of the uprights. Once all the slots and rungs are in place. Move on the the next ring using the same method as the first ring. The final ring can be inserted through the gap of the base and first ring then shaken upside down to get it close to where you need it.

I'll be posting an assembly video in the next few days to help anyone struggling. For now, the pictures are the only visual guide I can provide.

I'm including profiles for the P1P, A1,and A1 Mini. I don't own a Mini so the set up is a nerfed version of the base generic profile so it should work just fine. If you have any issues with the settings let me know and I will update the .3mf here. Thank you!