February 29, 2024
Description
These are bucket stilts designed to be easy to print and very resistant.
There are 2 versions, the first one (unicorn) is very resistant but consumes a lot of filament.
I made a lighter one (heart) that can still support an adult weight without issue
I printed it with 15% density.
They need support for the foot figure on the top, but not for the rest
Printer Brand:
Creality
Printer:
CR10S PRO
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
15%
Filament: GST3D PLA+ Blue - Pink
Notes:
You need to print it upside down (foot facing the bed).
Supports are required for the feet drawing but not for the inside nor the stabilization pad.
There are holes for a rope, but you will probably need to make them bigger if you use a solid rope.
Just a bucket with some drawings and holes.
The bucket is thick (1cm for the heart version - 1.5cm for the unicorn)
License:
Creative Commons — Attribution
Adristine Nedja
