Fire and Ice Glider

Warning: This glider is quite difficult to tune to flight stabile

Update:

v2 - Better performance

Overview

Glider in shape of flying creature.

To achieve god balance of model you have to print it with 100% infill.

I recommended print it with PLA, 0,2 mm layer height, 0,4 mm nozzle. 

It is good to print it also on PEI sheet to easy removal. 

To achieve color from upper side you have to use AMS or MMU.

To achieve color under wings you can use color swap option in slicer.

To achieve good flight you can tune model slightly. Bend up wings and tail a little.

If you fly outdoor I recommended add a little balast to the head (playdooh, plasticine) and bend up tail more.

Have fun.