Dyson toy vacuum cleaner replacement flap

Title should be description enough. 

To mount it, unscrew the single screw on the bottom

V1.3 is the improved version where the hinges are a bit sturdier. But this version also broke somhow :-D

UPDATE 2025-04-13:

Added the attachment piece. Fit should be Ok I printed a test-piece but not the one I uploaded. I apprectiate some feedback. 

Also I don't know how long it will last, I did not optimize it for printing, I used just the same measurements.

I still forgot some small “teeth” on one side, but I'm not sure if these are really neccessary. I'll change that in another version.

My Print Settings/Instructions Flap

Layer Height: 0.15mm (Mk4 Structural with InputShaper)

Infill: 15% (Modifier in .3mf with 100% at the hinges)

Support: On build plate only

Material recommandation: PETG

My Print Settings/Instructions Attachment piece

Layer Height: 0.15mm (Mk4 Structural with InputShaper)

Infill: 15% (Maybe 100%?)

Support: On build plate only

Material recommandation: PETG