MiSTer FPGA Top and Bottom Plate Case

This simple top and bottom plate for MiSTer FPGA helps protect sensitive electronics.

The top plate has 14mm standoffs built into it to clear all 40mm x 10mm fans.
The bottom plate has 4mm standoffs built into it to clear the bottom of the USB Hub (or DE10 Nano pcb if not using the hub).

To complete assembly you will need 4 m3x 25mm screws for the top plate and 4 m3 x 8mm or longer for the bottom plate. The m3 screws included with the DE10 Nano should be long enough for the bottom.

One other thing: the brass spacers that go between the IO board and the DE10-nano and the USB Hub may need to be changed out. Some kits include ones that have a thread part sticking out on one end which won't work since you need to be able to screw in the screws to hold the plate.

If you don't have the ability to print this out, I offer it for sale with hardware at my shop: https://retrofrog.net/products/mister-case-top-and-bottom-plate

Print Settings

Printer Brand:

Prusa

Printer:

Rafts:

No

Supports:

Resolution:

.3

Infill:

Notes:

Print flat side face down with no supports. I recommend using a textured built sheet for the nicest results.

Category: Toys & Games