Tel'tak Retractable MMU

• Gray bits
• Gold bits
• A few Black/Dark Gray bits

A bit different from my usual approach. This time using [alpha version of] PrusaSlicer 2.4.0's new color painter feature rather than split up .stls through Fusion360. 

Simply load up each .3mf file as a project into [at least] PrusaSlicer 2.4.0-alpha1 (i did these using alpha3) and the painted segments should be on the applicable part. Feel free to move each part around and/or modify any print settings as you'd like - these settings are simply what I used and come as part of the file. The only ‘modification’ I made was adding the ‘brim’ around the pointy part in part 1 to prevent potential sharp-corner-curling.

I hope your printer is well tuned; many of the moving parts require precise spacing to work well. Otherwise, I hope you are good with sanding ;)

Also you may want to size down the smaller pins to 97-98% to make it easier on your thumbs.

Try to ignore the printing errors in my images; I'm having issues with my printer/filament ¯\_(ツ)_/¯

Original model by Martin Taichl.