Mini 13 Classic Spiderman

This is more like a set of files than a remix. The idea of printing Classic Spiderman / Spidey on the base of Mini 13 came from @MattHewitt_1397360 in the comments of Spiderman Venom Symbiote.

The Red part (I used Prusament PETG Lipstick Red):

• From the original Mini 13 Printable Jointed Figure:
  • mini13-frame-chest.stl
  • mini13-frame-leg-4x.stl (2x)
  • mini13-frame-arm-4x.stl (4x)
  • mini13-frame-shoulder-2x.stl (2x)
  • mini13-armor-foot-2x.stl (2x)
  • mini13-frame-head.stl
  • mini13-armor-foot-2x.stl (2x)
     
• From the Mini 13 Spiderman Venom Symbiote Suit:
  • Venom-Head. stl
  • Spiderman-Hands.stl
• From the MINI 13: The Vulture:
  • Leg x4.stl (2x)
  • Arm x4.stl (2x) 

The Blue part (I used Prusament PLA* Royal blue):

• From the original Mini 13 Printable Jointed Figure:
  • mini13-armor-waist.stl
  • mini13-frame-leg-4x.stl (2x)
  • mini13-frame-waist.stl
• From the MINI 13: The Vulture:
  • Leg x4.stl (2x)
  • Arm x4.stl (2x) 
• From the MINI 13: Cobra Commander:
  • Chest 1 - Blue.stl

The Red + White part

• Remixed parts (can be found in files section):
  • mini_spiderman-chest_spider.3mf - filament change at 1.70 (Spider logo from svg4k.com)

The White + Black part

• Remixed parts (can be found in files section):
  • mini_spiderman-eyes.3mf - filament change at 0.90

*) I didn't find any “blueish” PETG so I used PLA, but PETG would be better.

Use a superglue on the chest sign, belt, and eyes.