A low-poly style aircraft model based on the impression of Zero Fighters.
The propeller and landing gears are spinnable.
Printing tips
- Ordinary settings (0.4mm nozzle & 0.2mm layer height) would be ok.
- Uploaded STLs should be in printing orientations (if not, see 3MF for reference).
- Better apply supports to print “Cockpit” part.
- Print two “LandingGear” parts.
Assembly tips
- If Needed, apply glue to secure fixed parts.
- Rotate “LandingGear” part into its slot (as shown in the image below).
Lali3d
