Airplane - easy to print

Print one each of the fuselage, wing, horizontal stabilizer, prop hub, snap-on nose cone, end cap for mounting to 1.5" PVC mast plus three prop blades (print the prop blades as a batch of three). You will need one each M4 x25mm bolt with 5mm precision bolt, M4 nut, M5x100mm precision steel dowel pin + three M4x16 steel dowel pins. Use instant bond cyanoacrylate to affix the wing, horizontal stabilizer, and propellers at the 15 degree prescribed angle, Note there are included bonding fixture designs for all but the horizontal stabilizer assembly. Add a pair of trailing ribbons for a nice effect. I printed mine in PLA+. Of course use of better materials such as ASA is recommended for long term use outdoors. Enjoy….