Chewbacca BobbleHead TPU spring

Hello, I did a bit remixed version of Chewbacca. I used spring from regular pen and it wasn't that good. So why shouldn't print some spring for it to make it even cooler right?

I used:
Polymaker PolyWood (for body)
Fillamentum Vertigo Grey (for base)
Fillamentum Flexfill 92A "Signal Red" (for TPU spring) (98A should work as well, maybe it'll be a bit stiffer)

Feel free to make your own :)

Print instructions

Category: Creatures Print Settings

Printer: DIY Hypercube

Rafts: Doesn't Matter

Supports: No

Resolution: 0.15

Notes:

2 perimeters
5 top / bottom layers
No infill!!! - to get right wooble

Post-Printing

Painting

I did paint eyes and belt with acrylic colors. You can use one layer of clear spray coat to seal it , but it's not necessary.

Glue everything together

I drop some superglue into the body, glued TPU printed spring and let it dry. Then I glued body to the base and just insert head on top of the spring. You can glue head to the spring, it's optional and feel free to do it by yourself :)

And that's it! Let's make one for you ;)