Nerf Rival Pilot Barrel

This is a replacement barrel for the Nerf Rival Pilot, the only difference is the spring hook that is replaced by a screw hole since the whole reason to design this is that the hook on my original barrel tore off. It needs one 6mmx2.6mm or one short toy screw, the same diameter as the normal Nerf screws, if you can't find the same lenght you could cut one longer screw. It has three screw holes in case the barrel is too tight and needs more spring tension to open. There is also a “loose” version, with a wider breach, in case you need one.

Print Settings

Should be printed with the flat end on the printbed and organic/tree supports from the buildplate, for strenght is recommended to print it in PETG or in any stronger material.