May 12, 2024
Description
Parts to make a quad plunger double slab. Also improved many parts of the double plunger slab to make more stuff work together.
The dual muzzle b in this file set can work with LS springs. The original does not work with LS springs.
The catch and muzzle a are slightly remodeled to be more cleaner looking.
There are 2 hand guards. one is normal length and one is a longer length. The longer one is larger than the build height of the prusa mk3.
Hardware needed besides ones for the dual slab:
2 10-32 5/16 length screws for the handguard.
6 o-rings
2 4 inch plunger tubes
glue
a bunch of 4-40 screws
2 more springs. Don't make these too heavy as you are priming 4 of them. Pictured model has 4 x7 springs. It might break on anything higher.
Remix of https://www.thingiverse.com/thing:5716677 https://www.printables.com/model/417044-slab-mlok-handguard-cut-at-an-angle to Get around the share alike license for the 2 handguard models. (boi one is even mine tf)
License:
Creative Commons — Attribution — Noncommercial — Share Alike
racerethan
