Barbapapa Family Nesting Dolls

The entire Barbapapa family (9 dolls), snuggly fitting together. You'll have to forgive the paint job, my 4-year-old insisted on helping!

There are 3 visual variations: The male members of the family, the female ones, and a special hairy one for the center piece, Barbouille. The 9 dolls have been modeled to have the same wall thickness and connector height, despite their different sizes.

All pieces should be big enough not to pose a choking hazard, but maybe err on the side of caution if your child has an extra-large pharynx.

Printing

I provided PrusaSlicer 3MFs with the below settings already configured. If you prefer using the STL files, please pay attention to the following:

• Seam: Make sure to use Rear for the seam position, to avoid unsightly lines on the face. I used a random seam for Barbouille, since he's supposed to be hairy.
• Brim: Contact surface is pretty small, use a brim.
• Supports: You probably need supports for the inside of the top parts. I've added some support enforcers in the 3MF files.