Teddy Skateboard (Remix)

A remix of 2 separate models (@BaGooN's “Filament Spool Holder” and @MeisterEdel's “Prusa Edition Tabletop Fingerboard Skateboard”) into a toy skateboard.

This is a fully operational skateboard designed for a 15-18 inch high teddy bear (such as a “Build-A-Bear”) or doll.

The skateboard is 240mm long by 80mm wide and around 72mm high and uses 608 bearings to provide freely rolling wheels.

Items required in addition to printed parts are:

• 4x 608 bearings
• 4x M3 hexagonal nuts
• 4x M3x16 bolts

I printed the body and trucks using PLA and the wheels using PETG, both with a layer height of 0.2mm and a 15% infill. Supports are required when printing the body, but all other are support free.

The 608 bearings should be installed on the inside face of the wheels. Do not over-tighten the bolts or you may damaged the PLA mounting parts. The trucks slide into the dovetail mounts on the bottom of ther skateboard body - they are a tight fit so some filing / triming may be required.