May 2, 2024
Description
This model is one from my extensive Children's Toys Collection.
A game for young children.
At first, they learn to place the gears in the correct positions. Always match the gear to the corresponding color on the base plate. When all gears are positioned correctly, the three large and the four smaller gears interlock and spin together. A wonderful color spectacle.
All STL files are correctly aligned.
Layer height: 0.2mm
Perimeter: 2
Infill: 15%
Support: none
The game thrives on its colorful display. And kids love that. Therefore, the base and all gears should be printed individually with different color combinations.
You can find the color changes (CC) in the following table. Layer #, height and color.
You are free to choose the colors according to your taste. The colors listed in the table are examples.
The only thing you need to pay attention to is that for the final color change of each gear, use the same color you used for the base.
Example: If you use orange for the Base at CC #1, then also use orange for the last CC for Gear l3.
| Start | CC #1 | CC #2 | CC #3 | CC #4 | CC #5 | CC #6 | CC #7 | CC #8 | |
Base | White | #10 2.00mm Orange | #12 2.4mm Yellow | #14 2.8mm Green | #16 3.2mm Red | #18 3.6mm Cyan | #20 4.0mm Blue | #22 4.4mm Pink | #24 4.8mm White |
Gear s1 | White | #14 2.8mm Yellow | #17 3.4mm Blue | #20 4.0mm Pink | |||||
Gear s2 | White | #14 2.8mm Red | #17 3.4mm Yellow | #20 4.0mm Cyan | |||||
Gear s3 | White | #14 2.8mm Yellow | #17 3.4mm Orange | #20 4.0mm Blue | |||||
Gear s4 | White | #14 2.8mm Green | #17 3.4mm Yellow | #20 4.0mm Red | |||||
Gear l1 | White | #14 2.8mm Yellow | #17 3.4mm Blue | #20 4.0mm Green | |||||
Gear l2 | White | #14 2.8mm Green | #17 3.4mm Pink | #20 4.0mm Blue | #22 4.4mm Yellow | ||||
Gear l3 | White | #14 2.8mm Green | #17 3.4mm Red | #20 4.0mm Orange |
If you like this design, feel free to check out my others here.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
vmLOGIC
