Die! Dice Tower with Trapdoor

I made this Die!-Tower for boardgames to make rolling the dice even more fun. Stack them up and let them fly with the push of a lever. 

Printing instructions:

• For a fast print, you can go down to 15% Infill for the Tower.
• Use 100% Infill for the Platform. The tower can bend a bit, the platform needs to stay accurate when being pushed in
• Print the small parts (Lever, Trap Door, Round Thing, Endcap) with 100% Infill
• print the trapdoor upside down. The bedside will be visible in the assembled tower. (This ensures the round features for the lever mechanism print nicely)

Assembly instructions:

1. Push the Lever into the Round Thing

2. Push the Endcap into the Round Thing

3. Insert the Lever into the hole in the Platform

4. Place everything on top of the Tower (hold on to the Lever so it doesn't fall out)

5. Push the platform down until it sits on the frame

6. Pull the lever into locking position

7. Place the trapdoor on top

I hope you have fun with this design and if you have tips for improvement let me know in the comments :)