Pump Action Indra Conversion

Changelog: 7-22-21 11:52AM EST: Changed foregrip to use Caliburn hole pattern.

Changelog: 8-21-21 9:19PM EST: Completely replaced all foregrip files with versions that have the picatinny rail closer to the barrel to improve stability while priming. Changed BRailD NoBottomRail to use 4-40 screws instead of pins (thanks old STEPs!). Made Bandle priming bar holes less tight. Added a "pullgrip", ie a massive lump that you pull on to prime.

Changelog: 8-26-21 11:25AM EST: Added a version of the pullgrip file with gripping texture.

You CAN put this on an existing Indra! This is an upgrade for the Indra by CaptainSlug which turns it into a pump-action blaster, instead of it's original bolt-action design.You CAN put this on an existing Indra!

This kit only adds two new prints; the foregrip itself, and a replacement Bandle part (ie, the part that you normally grab to prime the blaster. The bolt handle.)

The kit uses Caliburn length priming bars.

There are some optional parts of this kit, including:

• Versions of the BMuzz and BRailD parts without picatinny on the bottom, so you don't shred your hand while priming.
• A modified foregrip to work with Indra barrel top rails.
• A heavily modified foregrip that has no picatinny. Just grab it as a big chunk and prime. Its better if you don't use the threaded rod and muzzle of the Indra, instead just letting the foregrip slide on the barrel.

Wouldn’t this just make [the Indra] a Caliburn?

Keep in mind that the Indra has a 4.75 inch draw, VS the Caliburn's 6ish inches, the TC v3's 3.5 inches, and the TC v4's 4.25 inches. So this pump-action Indra is closer to a TC than a Caliburn, despite it's use of full-length darts.

The Indra's mechanism is also significantly different. The looks are also much different (better in my opinion), and the grip is more comfortable and less prone to breakage.

The balance of the blaster is also different, meaning this feels a lot nicer than a TC or Burn.

If you wish to print and sell this item, please contact me for licensing. I can be reached on Discord (Sillybutts#5905), Reddit (u/SillyTheGamer), or by Thingiverse comments.

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

No

Supports:

Resolution:

200

Infill:

Filament: FusionFilaments PLA

Category: Mechanical Toys