Zelda A Link To The Past Map - Dark World

I finally had some time to make the Dark World version of the A Link to the Past map with some extra details. Makes a great addition to any game room or just some wall art. I tried to make it as accurate as possible. I hope you enjoy it!

The normal map can be found here:

https://www.printables.com/model/814338-zelda-a-link-to-the-past-map

A display stand can be found here:

https://www.printables.com/model/876540-frame-display-stand

Colors

Black - Bambu PLA Black

Yellow - Bambu PLA Yellow

Teal - Inland PLA Green

Light Brown - Overture PLA Plus Brown

Dark Brown - Inland PLA Green-Brown

Light Green - Inland PLA Light Olive

Green - Inland PLA Green-Brown (I reused this one since I couldn't find a green I liked)

Dark Green - Inland PLA Olive Green

Blue - Overture PLA Jeans Blue

Purple - Anycubic PLA Purple

Printing

I have printed this with both a 0.2mm and 0.4mm nozzle. The smaller details will show much better at 0.1mm layer height compared to 0.2mm layer height, but they both look great. The time difference is pretty big to print between the nozzles.

For the 0.4mm nozzle:

Wall width: 0.4mm

Wall generator: Arachne

Layer height: 0.2mm

Infill: 10% Gyroid

For the 0.2mm nozzle:

Wall width: 0.22mm

Wall generator: Arachne

Layer height: 0.1mm

Infill: 10% Gyroid