Build-A-Taco

Build-A-Taco is a simple three part print that allows you to join a shell, veggies, and meat into your very own taco! I had limited color options.

This taco can be scaled up for you who are true taco lovers!

Recommended print setting:

• No supports
• No brim
• Print “Meat” laying down, but if you have a heated bed, you might get a more accurate print if all pieces are printed vertical. I used PLA and even the smallest pieces remained adhered to the printing bed for the entirety of the print.
• Infill will depend on how large you decide to make your taco
  • If your taco is not scaled up from the original 15% or less infill should work.

The three parts are designed to slide into one another and not fall apart, but they should be loose enough to swap any parts for other colors if wish to do so.

***NOTE***

The original scale of this print is very small, so the ease at which piece slides in and out will likely depend on the quality of your printer. I used a Prusa MK4 with a few modifications and had a perfect fit.

Please share your makes and thoughts on this print.