GG3D Commander Deck Box

GG3D's Commander Deck Box including a Commander Zone in the lid.

Fits 100+ Double Sleeved Cards.  Insert for dice/counters.  Magnetic lid completely detaches for a Commander Zone.

Requires Eight 10x3 round magnets (4 for lid, 4 for Box)

Box and Insert printed at .2mm layer height

Lid printed at .16mm layer height for certain details and color changes to happen at the correct spots.

Pauses required mid print to insert magnets so they are imbedded in print.

Note: If you are having problems with the quality where the text and magnets are, you may need to change the bridging direction over the magnets.  If possible, only modify bridging where the magnets get covered.  The new 3mf has this change added.  If bridging over the short direction in that part of the model, the bridges have less of a lip to hold on to. Here is the preferred bridging direction:

A lid without mana symbols will be available for anyone wanting to add their own symbols:

https://www.printables.com/model/887238-remixable-lid-for-gg3d-commander-deck-box

Commercial License and additional models found on Patreon: https://patreon.com/GalaxyGames3DPrints

Update 06/11/2024:  Lowered the top of the magnet opening to make less gap between magnet and top by 1 layer.  This should improve the text reducing the sag of the bridging as well as adding an extra layer for strength and quality of text area.

Update 06/27/2024:  Modified the insert to have a little better of a fit.  Updated the 3mf file with new changes as well as new slicing for the lid to improve quality where the magnets get bridged over.  The new slice of the lid changes the direction of the bridging over the magnet to give more of a lip for the bridge to connect to.