June 4, 2024
Description
Recommended print settings:
PETG
0.25mm Structural on 0.4 nozzle
Nozzle temp first 3 layers 230°C, otherwise 240°C
Print bed 80°C
min 4 perimeters, 4 layers top and bottom
gyroid infill 10%
Provided Prusa XL gcode is configured for extruder 5 as main extruder, and extruder 1 as secondary extruder. In my case loaded with yellow and black respectively.
First print failed and I did not have enough yellow filament left, so I made this white and yellow version.
License:
Creative Commons — Attribution