Treasure Chest Puzzle Box Remix Collection

Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. 

If you find this model useful, feel free to buy me a coffee. 

This is a collection of remixes for 3DPrinty's amazing Treasure Chest Puzzle box. This remix features:

• Bigger knobs on the latches, so they're easier to slide. (Currently only for the Honeycomb and Cube styles.) I don't have any pictures of the remixed latches yet, but you can see them in the 3D viewer. 
• If your original left and right latches would slide open even when the middle latch was closed, try my tuned axle weight and axle cap. The cap has a slightly smaller angle of opening, so the slats are less likely to push past when they shouldn't. The axle is a tiny bit longer, so it's less likely to sag in the mount. I don't recommend printing these unless you have trouble with the originals. (The originals work fine for most users.)

Print without supports. You can use Cura's Horizontal Expansion or PrusaSlicer's XY Compensation if your parts print too loose or too tight. (A negative number, like -0.1, will result in a looser fit.)