LIEBHERR LR 13000

"Miniature" model of the Liebherr LR13000 crane.

This model of the LR13000 exceeds one meter in height and is completely dynamic, replicating all the movements of the original crane.

The model is designed for motorizing the lifting part of the main hook.

Printed entirely in PETG, approximately 3kg of material was needed. Most pieces are printed in 0.15 except for the "round" parts and smaller pieces which are printed in 0.10

For the construction of this crane you will need: 

-N°3 M6X55 screw UNI 5931 -N°3 M6 nut UNI 5588 

-N°3 M3X16 screw UNI 5931 

-N°3 M3 nut UNI 5588 -N°2 Ø12.9 bearing matrble (optional) 

-About 15m of rope (max Ø 2m) 

-About 15m of metallic wire Ø1mm 

If you want to motorise the main hook you will also need it: 

-N°2 AA 1,5 V battery 

-N°1 battery case for 2 AA battery 33x69x19 

-N°1 3 way, 3 position deviator switch 

-N°1 3V elettric motor, about 100 rpm Ø12mm body

If you want to have an idea of what you're getting into, I'll leave you the project presentation link:

Buona fortuna!