Dart Zone MK3 side Picatinny

These models are designed to replace the decorative side plates of the Dart Zone Pro MK3 and add Picatinny rails. The rails need a total of six M3 bolts that can be between 8 and 14mm long. I've also included the STEP file for the plates in case someone wanted to make some personalized ones.

Printing Instructions

All the pieces can be printed without supports. The plates can be printed with the wider face on the printbed and the rail with the base on the bed.

Assembly Instructions

First of all disassemble the stock plates then, with the stock screws, mount the new plates to the shell. To top it all off screw the rails with the M3 bolts.