June 15, 2024
Description
This is yet another dart holder designed for Nerf MEGA darts but with a little plus: It is optionally hardware free. It can use both a M4x30 bolt with its nut or the printable pin included in the files.
Printing Instructions
The holder needs to be printed with the Picatinny mount on the printbed, if you need it you should use a brim. The pin can simply be printed with its flat side on the bed.
Assembly Instructions
The holder simply slides on the rail, then you can fix it with the bolt or the pin.
License:
Creative Commons — Attribution
Dom's 3d Print Shop
