• Models
  • Contests
  • Slicer
  • Login
  • Start Here
    thingiverse-iconprintables-iconcults3d-iconmakerworld-iconmyminifactory-icon

    3D GO

    3D ModelsContestsCollectionsSaved ModelsOn a mobile device?

3D GO

Privacy Policy
Custom longboi Cynthia Remix 3D Printer File Image 1
Custom longboi Cynthia Remix 3D Printer File Image 2
Custom longboi Cynthia Remix 3D Printer File Thumbnail 1
Custom longboi Cynthia Remix 3D Printer File Thumbnail 2

Custom longboi Cynthia Remix

Shadow-_-Dancer avatarShadow-_-Dancer

February 2, 2025

printables-icon
DescriptionCommentsTags

Description

This is an upload of all the files I used in making my Cynthia, based on/Inspired by the looks of the Indra Full Snooper Variant and incorporating from scratch redraws of some other existing mods, such as a fully enclosed bolt guide, dart guide and deeper buttstock.

 

Some notes:

Needs no additional hardware outside of what the parts kit came with.

All the files are oriented as they should be printed.

Most of the tolerances are set at 0.1mm which might be too tight for some printers, Ymmv.

You will need a large format printer to print some of the parts without cutting them up first.

The hand guard is a single piece a little under 39cm tall.

The split hand guard needs glueing together at the joints, CA glue should be strong enough but a 2 part epoxy might be better due to the longer working time/less brittle bond when cured.

The bent bolt handle is keyed and glues into it's hole in the bolt base, printed solid on it's side it's been nice and strong so far, some sanding will be required to smooth and round out the underside (as printed) of the shaft and knob (I also used CA glue as a filer).

There is also a BoltBase for stock straight bolts.

The order of assembly differs only a little from normal, mostly with regards to the trigger as it needs to be dropped in to the bolt guide and the rod then threaded in from the back, please consult the CAD file to see what goes where.

 

Hardware List=
Out Of Darts parts kit
Spring of choice (K26 in my case)
45cm, 13mm ID, 16mm OD Barrel

 

(EDITS)
Added a split handguard + refined barrel O-ring grooves
Added BoltBase for stock straight Bolt Handle

 

credits
The blaster, Cynthia - Bolt Action Blaster
The Rails, Parametric NATO (Picatinny) rail
Inspiration/Basis for the handguard, Indra Full Snooper Variant
Inspiration/Basis for the fully enclosed Bolt guide, Cynthia Closed Bolt mod/Custom Sillybutts Cynthia
Inspiration/Basis for the dart guide, Improved Cynthia Dart Guides
Inspiration/Basis for the buttstock, Cynthiøx Stock - Skeggøx buttplate meets Cynthia

License:

Creative Commons — Attribution — Noncommercial — Share Alike

Related Models

Spinning Tops Orbital Series preview image

Spinning Tops Orbital Series

YSoft_be3D profile image

YSoft_be3D

38,467

Glacier Gauntlet: Milo's Challenge, a printable game! no supports, built-in springs preview image

Glacier Gauntlet: Milo's Challenge, a printable game! no supports, built-in springs

Nat profile image

Nat

229

Ultimate Toothpick Crossbow V2 preview image

Ultimate Toothpick Crossbow V2

Sairae profile image

Sairae

476

Micro Catapult preview image

Micro Catapult

LukeTansell profile image

LukeTansell

36,948

Jedovatý meč (V.01) - Metin 2 - Sword from game preview image

Jedovatý meč (V.01) - Metin 2 - Sword from game

Gampi profile image

Gampi

20

地球仪-六一儿童节礼物-男孩女孩涂色玩具 preview image

地球仪-六一儿童节礼物-男孩女孩涂色玩具

Big crab profile image

Big crab

9

Spirograph preview image

Spirograph

3Domas profile image

3Domas

26,793

Greed on the Grill: A 3D Printed Food Stacking Ballance Game preview image

Greed on the Grill: A 3D Printed Food Stacking Ballance Game

Gerse profile image

Gerse

20