Sci-fi mini spaceship toy No.5 easy print - no supports

Mini toy sci-fi spaceship.

• Easy to print parts - no supports required
• Designed with colour breaks. Print parts in different colours on single colour printers for a more interesting look.
• Easy to assemble - requires one #4x3/8" pan head screw (or a 4G x 9mm sheet metal screw) to secure the windscreen
• A Phillips head #1 screwdriver is also needed. Very helpful (though not always necessary) is a hobby knife, a selection of small files, and/or some sandpaper.

The part orientation as per upload is correct. Interconnecting part fit may be tight, depending on the plastics used, or the printer/slicer settings. Carefully warming female parts (hot water works well) can help with assembly, as can some careful sanding or filing, or even reducing/enlarging the part size slightly during slicing/printing.

Slide the windscreen in from the side and secure with the #4x3/8" screw (or a 4G x 9mm sheet metal screw) from the rear. Insert the engine into the tail prior to inserting the tail into the hull.

Happy swooshing!