February 18, 2025
Description
This model uses very little filament and the result is very interesting (in my opinion) and protects my airplane models from dangerous hands. Additionally, gives a kind of “diorama look” to the models.
This model was printed using a 0.8mm nozzle, but it can work with a 0.4mm nozzle.
The main hangar roof is intended to be printed in vase mode.
The ground piece is printed on top of the colored printed marks, fusing the 0.15 height marks with the black ground printed on top of them.
The structure is glued with cyanoacrylate.
– Please share your suggestions for this model or other alike that you wish to be developed -
License:
Creative Commons — Attribution
tgirao
