Silly Shell Holder - Side Shells (single sided or double sided)

A simple Silly Shell holder! 

Originally designed for the Wildstyle Shotgun Pistol blaster.

Two files are included.

1. Holds one shell on either side of a picatinny rail. Symmetrical.
2. Holds two shells, one on each side of a picatinny rail. Symmetrical.

Print settings

I recommend printing these holders at 5 walls 20% infill. 

A brim can be helpful if you have bed adhesion issues.

Attaching to a blaster

The holders are attached to the rail by 2 4-40 screws (or #4 or whatever screws fit in the holes). The screws go directly into the plastic on the holder, which will wear out if you take them out a lot. 

You can use M3 heat set inserts and M3 screws if you want to have a more durable long-term solution.

Misc.

If you print any of my designs, I'd love to see yours! Please consider leaving a Make on the Printables page, and leaving a review!

China: 你好！ 我擁有這個設計。 想生產請聯繫我. 你好！ 我拥有这个设计。 如果你想生产，请联系我.

Disclaimer:  Blaster must be operated correctly to avoid injury. I am not responsible for any injuries from this blaster. Please use a bright/blaze orange muzzle and barrel cap on this blaster. 

Changelog:

• 5-30-2024: Release
• 9-29-2025: Added STEP and F3D source files for these parts :)

Donations & Merch

If you like what I do, please consider supporting me! 

I don't charge for my files, so any donations or merch purchases would be greatly appreciated!

• Patreon (Monthly donations)
• Buy Me A Coffee (One-time donations)
• AWESOME shirts made in collab with Brandon Diaz
• RedBubble My merch shop, full of fun Nerf-y stickers and shirts!