Nintendo Switch Car Holder

The holder that A2S_dESING made came out a little brittle and had to have a lot of supports because of the way it was designed. I remixed the version so that it can be printed upright. The holes in the back can be printed without supports, leaving the model with a nice finish. Also made the model thicker, to withstand handling from children. 

You will find the rest of the parts you need from the original designers model:
https://www.printables.com/model/512457-nintendo-switch-clamp-for-car

----------------------------

Layer height: 0.2mm
Supports (Holder without nut): 
Bottom two holes (for speakers), use organic/tree support. 

Supports (Holder With nut): 
Bottom two holes and the nut. Use “on overhangs only” in paint-on-support, see screenshots.

Infill: about 15 - 20%. 

Material: PLA. If printed in PETG, add about 10mm brim because of warping in corners. 

-----------------------------

Shout out if you have any feedback for the model.
Happy printing!