Flywoo CineRace20 - Air Unit O3 compatible frame

Printed in PETG+, 2 walls, 20% infill. Full complete drone without battery = 140g, with 4S 850mA bat = 210g . Print two of the same model, no need to flip or mirror.

Insert the original 4mm carbon fiber inserts to the frame for complete build.

Crashed once at 40mph into a tree and cracked a frame. Could easily use CA glue to secure it for longer, or have additional replacements when in the field for long time. I glued up some EVA foam strips on the side for bumpers (14x215mm). Barely adds weight, and will help to keep a damaged frame intact while outside.

Still testing the durability of the other axis. Might edit later with larger walls as it's still sub-249g with a 850mAh 4S battery.