Cubitos Dice Box and Card Display - Fowl Play Expansion

This is an addon to MagnumDanger's excellent Cubitos Dice Box and Card Display at https://www.thingiverse.com/thing:4809766, which adds the additional boxes needed for the Fowl Play expansion.

You will need to print 1 of each of the "Lid" files, and 2 of each of the "Base" files. 
(Plus the original files for the base game, which don't need to be re-printed if you already have it - there's enough space for the additional dice added by the expansion)

Print instructions

Resolution: 0.2mm
Infill: 15%
Supports: No
Filament: PLA

How I Designed This

The "Base" files are identical to the originals, but figured I'd include them to make things easier.

For the "Lids", I took the blank lid from the original design as a starting place, and then it was just a matter of adding the flamingo and pigeon icons for the Dice Lids and the Purple and Green Player text for the Player Lids.

I borrowed the icons from mrgigg's fancier Cubitos Board Game + Fowl Play Expansion Organizer at https://www.thingiverse.com/thing:655544. This proved to be very tricky because not only did I have to cut them out and adjust their size and depth (by eyeballing it), but the flamingo was partially corrupt or something, and Tinkercad didn't render it properly. I did a lot of trial-and-error with other software/websites to try to fix it, and eventually managed to get something to work (though I don't remember now I ultimately fixed it).

I tried to figure out the font used for the text to make it consistent, but Tinkercad simply doesn't have the exact same font and spacing. Luckily, the letters in "GREEN" and "PURPLE" were already in text from the other boxes ("PLAYER" was obviously already there), and I was able to essentially copy-paste it together like a ransom note.