January 16, 2025
Description
Updated 1/15/25 - Added a v2 version that has the finger grip ‘fins’ come up a higher for a more secure hold. Some small changes to the attachment block geometry mean you need to use both v2 parts together.
The attachment block sandwiches the bottom pic rail. Slot in two m4 hex nuts into the two slots in the main pump body, slide onto the Lynx/Lonx pump assembly, affix the attachment block using two M4x30mm or 35mm socket head screws. Orient both files to print from the “back” up.
The grip should work with most of the EnderSavestheDay shrouds on the 2.0 Lynx, probably not the heavy one.
License:
Creative Commons — Attribution — Noncommercial — Share Alike