December 13, 2015
Description
FPV Board Camera Mount for Emax NightHawk 250 Quad. Angled at 25 degrees. Camera is attached using four M2.4 x 6mm socket screws (Available at Home Depot). Screw holes spaced at 27mm.
Camera is recessed back so the lens does not protrude far beyond the front pillars. If / when a crash happens, this will reduce the chance of any broken lenses. It also reduces the amount of debris the props fling onto the lens as well.
Prints in two pieces at 20% infill.
License:
Creative Commons - Attribution
RotorGator
