Ender-3 ASSM (Angled Side Spool Mount)

Just want to share my own angled side spool mount :)

I've used before the "Ender-3 Side Spool Mount" which was working great but i've noticed that i need to lift up the z axis everytime i want to change the Spool because of the x-axis motor, which prevent to remove the Spool. As alternate, i've found the angled one but in my opinion i'ts with around 45° to strong angled in case of some reasons.

So i decided to make my own version. It's only slightly angled, just enough to have enough space to the x-axis motor. You will be able to remove the spool everytime you want and you got a smooth filament feeding without high angles - besides that, it's maximum easy to print :)

Recommendation:

I've combined it with following spool holder:
https://www.thingiverse.com/thing:2988540
if you want to use 608zz bearings you can try this remix:
https://www.thingiverse.com/thing:3059893

For me, all inconsistent and/or under extrusion problems are completely gone with that setup.

Versions:

• Standard - should work with all available standard sized spools (HATCHBOX ROLL IS TO BIG)
• Plus 10mm - just to be save its 10mm higher. I've used this ones on the Screens. RECOMMENDED!

Needed Parts:

• The 2 included stock nuts
• The 2 included stock screws
• 2 more bolts of M5x10mm should do it then.