January 24, 2016
Description
A small vise for the generic 4030 CNC router, it can hold stock up to 40mm wide.
It includes a clamp that can be screwed on top of the vise to hold down the stop more firmly.
It can use two or three of the T-Slot nut traps, if you use three you'll need two more M4x15mm screws and nuts.
It needs the following hardware to complete:
1x- M5x50 or 60mm bolt.
1x- M5 nut
4x- M4 nuts
4x- M4 washers
2x- M4x40 screw
4x- M4x15 screw
2x- M3x6 countersunk head screws (for the jaw guide bottom)
License:
Creative Commons - Attribution - Non-Commercial
CaptainObvious
