OpenBuilds Slider Levelling Platform

This is a slider leveling base for use on an OpenBuilds V-Slot Gantry.

I have included two bases. The Base - Fixed keeps the hinge point fixed. I have not printed that one but it should work but will restrict the angel from going all the way to 90 degrees...

I found in testing this is adequate for mounting the camera and a light ball head. If you start adding a lot of weight it will flex... I may add a mount with a fixed rather then slot mounting location for the camera... that, with some bracing would be stiffer...

two braces are required, one for each side of the mount.

Parts :

http://openbuildspartstore.com/v-slot-gantry-plates/
10 m5 nuts (https://www.amazon.com/Steel-Plain-Finish-Gray-Pack/dp/B000NBKLHS/ref=as_li_ss_tl?ie=UTF8&qid=1461296032&sr=8-1&keywords=m5+nuts&linkCode=sl1&tag=wwwbethnchris-20&linkId=76deb44c04eeb3c6f2a6e22da79fa242)
Open Builds flat headed m5 bolts
1 1/4 20 camera screw (https://www.amazon.com/Steel-Plain-Finish-Gray-Pack/dp/B000NBKLHS/ref=as_li_ss_tl?ie=UTF8&qid=1461296032&sr=8-1&keywords=m5+nuts&linkCode=sl1&tag=wwwbethnchris-20&linkId=76deb44c04eeb3c6f2a6e22da79fa242)

I'm going to look for thumb screws that fit without hitting the gantry plate as I don't want to have to carry an allen wrench with me...

In the photos I'm using :
Andoer Adapter Plate Square Clamp - (https://www.amazon.com/Steel-Plain-Finish-Gray-Pack/dp/B000NBKLHS/ref=as_li_ss_tl?ie=UTF8&qid=1461296032&sr=8-1&keywords=m5+nuts&linkCode=sl1&tag=wwwbethnchris-20&linkId=76deb44c04eeb3c6f2a6e22da79fa242)
Fotga Universal Quick Release Plate L Bracket - (https://www.amazon.com/Steel-Plain-Finish-Gray-Pack/dp/B000NBKLHS/ref=as_li_ss_tl?ie=UTF8&qid=1461296032&sr=8-1&keywords=m5+nuts&linkCode=sl1&tag=wwwbethnchris-20&linkId=76deb44c04eeb3c6f2a6e22da79fa242)