May 23, 2016
Description
An alternate frame to use with Hovership's 3DFLY micro quad kit. http://shop.hovership.com/3dfly-micro-quad-kit/
smaller (83mm vs 110mm)
symmetrical X frame
integrated FPV (for spektrum Va1100 or similiar)
The board is installed in a diagonal orientation, so make sure to set your board orientation in CF to 45deg yaw.
The FPV Top plate is attached using tiny elastics or a small band of heatshrink. The VA1100 is attached to the top plate using double sided tape and/or elastics. Because this is a custom build, your current 3Dfly installation may not transplant without some modding. I personally mount the pins angled, and direct solder the motor wires to the board. With these micro builds, every gram counts.
If you want to give back to the designer and design, please purchase at https://pinshape.com/items/22156-3d-printed-ag-3dfly-83mm-xframe
License:
Creative Commons - Attribution - Non-Commercial - No Derivatives
AnthonyKwon
